Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> South
> Ls microarray laser scanner by tecan LS200 ls 200
Ls microarray laser scanner by tecan LS200 ls 200
LS LASER SCANNER BY TECAN LS200
LS MICROARRAY LASER SCANNER BY TECAN LS200
4 minutes for a full slide, 25 minutes a SBS plate (dual color, 10 m pixel resolution),
Less than 0.1 Fluorophore equivalent/ m2
Slides 22x75 mm one run; 1-96 scan areas over an area up to microplate footprint (automated stitching)
635 nm, 532 nm, 488 nm & 594 nm options
Accelerated and reliable microarray analysis: With its automation-ready design, parallel dual channel detection capability, and ability to operate up to 4 excitation lasers and 28 emission filters, Tecan s LS Reloaded Scanner greatly accelerates fluorescence laser scanning. Increased throughput and multiplexing capabilities for array and other micro feature scanning and analysis mean savings in both time and resources: *Compatible with standard 3x1 inch slides for customized chips and microplates *Three different grades of confocal measurements *Autofocus system for planar adjustment with capability to scan through glass *Spatial scanning resolution from 6 to 40 m *4-color scanning to increase multiplexing capability *Scattered light scanning capability to detect insufficient spot quality prior to hybridization without dyes *Adjustable angle of laser beam for dual colour scanning of Evanescence Resonance slides increases Cy3/Cy5 sensitivity 10-fold *LaserCheck assists in verifying and documenting the consistent performance of LS *4-slide adapter provides seamless integration of HS 4800 Pro and 400 Pro Hybridization Stations and Connect autoloader with LS Reloaded *Connect autoloader provides scalable throughput for batch processing of up to 200 slides or 50 microplates *Array-Pro Analyzer provides every conceivable image analysis tool to characterize the measurement system and achieve maximum signal/noise ratios, repeatability of results and quantitative accuracy
THIS IS IN VERY GOOD CONDITION WITH ONLY A FEW SCRATCHES IN PLASTIC CASING. THE LOGO HAS BEEN PARTIALLY REMOVED FROM LOWER FRONT.
HAS 2 CONNECTORS ON BACK,ONE IS A SERIAL TYPE 9 PIN CONNECTOR AND THE OTHER IS A 10 PIN CONNECTOR
