Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> North
> Used
> Msa portable alarm model 360 gas detector w/ ac adapter
Msa portable alarm model 360 gas detector w/ ac adapter
Photobucket(more photos below)
This is a used hand-held Gas monitor. It was recently removed from service from a large corporate envrionment.
It is designed to monitor levels of oxygen, carbon monoxide, and combustible gases. The face of the unit has a Flow indicator, Alarm LED, LCD rwad-out for Oxygen, Carbon Monoxide, and Combustible Gas, and a light switch.
It also has 4 knobs. The 1st knob (labeled FUNCTION) cycles between: OFF / SCAN / MANUAL / HORN OFF. The 2nd knob is labeled ZERO and TOX. The 3rd knob is labeled CALIBRATE and OXY. The 4th knob is labeled ZERO and LEL. There are also 2 buttons labeled SELECT and RESET. The side of the unit has a nozzle, and what appears to be an input jack. All knobs rotate freely, and the buttons seems to operate normally.
The unit looks to be in fair overall condition. The body is free of major dents, but does show wear. There is an ID number and other identifying marks written on the side. There may be some labeling residue on it (from ID tags and such). I will try to remove as much as I can. Last calibrated in 2003. Battery is untested, but assumed bad.
* Attaching hose and filter housing
