Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> North
> New
> T-962 bga smd infrared ic heater reflow oven 180*230MM
T-962 bga smd infrared ic heater reflow oven 180*230MM
PUHUI T-962 Infrared IC Heater
180 235mm Area with Digital Control
THE PRODUCT IS NEW, I JUST UNPACKED , TEST IT THAT IS WORKING PROPERLY AND PACK IT AGAIN FOR YOU
Pieces with DOA CoverageSpecification:
Weight: Around 7.5 Kilo with Packing
Soldering area to reach effectively :180 235mm.
(2). Many temperature wave choice for you.
8 Automatic parametres can be chosen and also cool off functions, the full process can be automated to save time and money.
(3). Special heat up and temperature equalization control.
(4). Perfect Balance between technology and human resource.
Portable and little space for one person use, easy for any person to start and finish the whole project.
Return soldering,drying, heat preservation, finalize the design, fast cool off. Can work with the smallest part or chip: BGA, Mini BGA, QFP, SOP, PLCC or SOJ
This machine due to the areas should be used for boards from 5 * 5cm to 18 * 20cm , including mobile phones, Video Boards, some Laptops, special projects , Tv boxes, camera boards . This machine is not recommended for Consoles , the IR Tray Area is smaller than consoles boards.
ADVANCED: WE HAVE THE SKD 862D++ - IT DOES CHIPS UNTIL 35mm , THE PLATE IS 120 * 120mm the equipment is SOLDERING IRON, HEATING HOT AIR GUN, HEATING PLATE AND INFRARED BEAM. IS MIDDLE CLASS PRICE BUT WONT DO EXTRA BIG CHIPS OR BIG MAIN BOARDS. THE BEAM IS DIRECT AND WITH NO LENSES TO DECREASE OR INCREASE TEMPERATURE. THIS MACHINE DOES YOUR HEATING SOLDERING , LAPTOPS, MEDIUM BOARDS AND ALL THE MINI ONES . IT COMES WITH 3 LENSES OF EXPANSION. THE LENSES IN ANY MACHINE DO ROUTE THE BEAM AND FOCUS IT , DON'T DO INCREASE OR REDUCTION OF TEMPERATURE, ONLY FOCUSING.
EXPERT: WE HAVE THE PUHUI T-862++ ( DO NOT CONFUSE WITH THE LAST ONE ). IT DOES CHIPS UNTIL 35mm, THE PLATE IS 120 * 120mm the equipment is SOLDERING IRON, IRDA HEATING PLATE AND INFRARED BEAM ONLY. IS MIDDLE CLASS PRICE, BUT WILL HAVE LENSES ON THE BOTTOM OF THE BEAM. HAS 3 LENSES FOR FOCUSING 25 / 35 / 45mm CIRCLED AREA ( 10 LESS COVERAGE FOR SQUARED MM). THIS MACHINE DOES YOUR HEATING SOLDERING , LAPTOPS, MEDIUM BOARDS AND ALL THE MINI ONES IS IN THE SAME CLASS PRICE OF THE ADVANCED MACHINE BUT PROVIDES MORE QUALITY FINISHING THAN THE ADVANCED ONE AND THE EXTRA LENSES, BUT DO NOT HAVE HEATING BLAZING HOT AIR GUN.
POWER SOURCE REGULATED OR A VOLTAGE REGULATOR IN YOUR WORK PLACE , PLEASE DO NOT COMPLAIN IF YOU JUST PLUG YOUR MACHINE DIRECTLY TO A POWER PLUG ON YOUR WALL, YOU ARE WARNED ABOUT IT.
That is why your product is insured. If by any change your product is getting into your hands damaged or destroyed, is your responsibility to reject it and do not sing for it, if you accept a damaged product you will totally accept the responsibility for that product and void ours. Any product that is damaged in the transit time between our office and your location MUST BE REJECTED by you or your authorized person.
