Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> North
> New
> National instruments at-gpib/tnt isa gpib controller
National instruments at-gpib/tnt isa gpib controller
Pulled from working equipment during an upgrade. These are ISA bus GPIB cards. Please verify that you need an ISA card, no returns will be accepted for this reason. Guaranteed not DOA, must contact me within 3 days of delivery.
The NI AT-GPIB/TNT is a high-performance IEEE 488 interface for PCs with ISA slots. The NI TNT4882C ASIC makes the AT-GPIB/TNT a maximum-performance IEEE 488.2 interface and performs the basic IEEE 488 Talker, Listener, and Controller functions required by the most recent GPIB specification (488.2). The AT-GPIB/TNT can sustain data transfer rates greater than 1.5 Mb/s (488.1) and implements the high-speed GPIB protocol (HS488) for greater transfer rates. There are two versions of the AT-GPIB/TNT: the AT-GPIB/TNT (Plug and Play), which features a jumperless configuration, and the legacy AT-GPIB/TNT, which uses DIP switches and jumpers to configure the interface. Both interfaces contain identical GPIB interface functionality.
