Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> Monitowoc ice machine qy-0214A/115-1
Monitowoc ice machine qy-0214A/115-1
Up to 220* lbs. (100 kgs.) daily
ice production *Production rating outside the scope of ARI Satndard 820.
Only 26" (66.04 cm) wide, 26.50" (67.31 cm) deep, and 38.50"(82.55 cm) high on 6" (15.24 cm) legs
80 lb. (36.6 kg) ice storage capacity
Slide up and in bin door tucks under ice machine top cover. Patented ice damper maximizes ice storage capacity
Stainless steel exterior with the fit and finish of an appliance
Patented cleaning and sanitizing technology
- 5-year parts and 5-year labor coverage on ice machine evaporator
- 5-year parts and 3-year labor coverage on ice machine compressor
- 3 year parts-and-labor coverage on all other components
ISO 9001 Quality System Certified
ICE CUBE MACHINES ICE STORAGE BINS
A seamless blend of thoughtful design, new technology and rugged construction.
Ice production lbs./Kgs. 24 hours
Water usage/100 Lbs./45.4 Kgs. of Ice
Potable Water: 33.5 gallons, 127 Liters
Water-cooled Condenser: 142 gallons, 537 Liters
A or W following model number indicates Air or Water condensing unit.
Certified In Accordance With ARI Ice Storage Bins Certification Program, which is based on ARI Standard 820
115/60/1. (208-230/60/1 also available.) For 230/50/1 see 50 cycle literature. 115/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord and NEMA 5-15P-plug configuration. 208-230/60/1 ice machines are factory pre-wired with a 6' (180 cm) power cord only, no plug is supplied.
Air-cooled 7.8 amps. Water-cooled 7.0 amps.
Air and Water-cooled 15 amps. HACR-type circuit breakers can be used in place of fuses.
Production for Dice and Half Dice cubes. Regular cube is 7% less than chart and kWh/100 lbs. increases 7%.
Installation Note - Recommended clearance for top, sides, and back is 5" (12.7 cm) however, there is no minimum clearance required.
B 3/8"(0,95cm)F.P.T. Ice Making Water Inlet
C 1/2"(1,27cm)MinimumF.P.T. Water Condenser Outlet (water-cooled units)
D 3/8"(0,95cm)F.P.T.WaterCondenserInlet E 3/4"(1,91cm)BinDrain
1.25" (3.17 cm) 2.12" (5.38 cm)
3,800 (average) 5,000 (peak) Compressor:
(Water-cooled models) Adds protection from corrosive water elements.
Water Pressure Ice Maker Water In:
Min 20 psi (137.9 kPA) Max 80 psi (551.1 kPA)
Condenser Inlet Water In: (Water cooled only) Min. 20 psi (137.9 kPA) Max. 150 psi (1,034.2 kPA)
Certified IEC 335-1 IEC 335-2-24
Air in left, air out right, no side vents.
Slides out from left side front without tools, easy to clean, reusable filter protects con- denser from lint, grease and dust.
3 8" x 11 8" x 7 8" (.95 x 2.86 x 2.22 cm)
7 8" x 7 8" x 7 8" (2.22 x 2.22 x 2.22 cm)
11 8" x 11 8" x 7 8" (2.86 x 2.86 x 2.22 cm)
Initiate ice, off and clean operations with simple upfront selector switch. No need to remove front panel.
