Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> High vacuum research chamber edwards pump system mdc cf
High vacuum research chamber edwards pump system mdc cf
We have for sale a MDC High Vacuum Research Chamber Edwards Pump System.
This is a great vacuum test chamber that has been Helium Leak tested and is guaranteed to work great.
This chamber is ready to go with pressure down to 4 mTorr and these specifications:
A MDC High Vacuum Research Chamber:
Two 10 CFF Conflat Ports with Two 10 MDC CFF Blanks
8-KF40 Ports with 7 that are Caped
The inside of the chamber has an Upper and a Lower section:
Upper Section 26 OD, 23 ID @ 11 High
Lower Section 26 OD, 23 ID, 4 Deep with a 7 ID center port to vacuum
Also a handy handle and hook attachment to raise the lid with 19 inside height and 24 outside height.
Edwards 30 E2M30 Rotary Vane Dual Stage Mechanical Vacuum Pump Rebuilt Refurbished
With good pumping speed and quiet operation
Rebuilt with factory specs of 1mTorr
1 Phase 110-240V or 3 Phase 220-460V Wired for 115V
New GP 275 Convectron Pressure Sensor
New GP 275 Convectron Gauge with manuel
Edwards PV125MKS Shut Off Valve
With a Marathon Electric Motor that has 115/208-230Volts, 60Hz, 1 Ph and 1725 RPM.
The whole vacuum chamber sits on a steel (32 x 48 ) platform table with nice coasters for mobility with dimensions of (48 x 32 x 42 inches tall) and 22 clearance between the top and the shelf.
There is also under the chamber a 11 ASA with a KF40 entrance port for the vacuum system.
This is a great set up that is ready to go and we have seen the chamber test down to 4 mTorr(as shown in the photo)
And is guaranteed to be as we have said upon arrival with a 30 day warranty.
PS: Please double click scroll down photos to enlarge for a closer view of the item.(B814_d09)
NOTE: A manuel can be given for the pump and other high vacuum items can be added if needed like gate, turbo,ect.
