Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Metalworking
> East
> Used
> 9 buhler/allied front end loader 84" bucket teeth,tooth
9 buhler/allied front end loader 84" bucket teeth,tooth
Brand New Set of Buhler/Allied Bucket Teeth for Buhler/Allied Loaders with 84" Standard "B" Series Buckets.
This Set has 9 Bucket Teeth and Includes all Attaching Hardware as Shown in Photo.
Yes, These Teeth will Work on any Bucket, But Holes will Need to be Drilled to use the Fastening Hardware.
* With the Predrilled Holes in the Series "B" Buhler/Allied Buckets, each Tooth is Secured at Two Points.
* The Rear of the Tooth is Secured with a Single Bolt.
* The Front of the Tooth is Secured with a U-Bolt.
* The Rear Bolt & The Front U-Bolt are Visible in the Photo.
* The Older "X" Series Buckets used a Bolt in the Front & Rear - A U-Bolt was not Used.
* We Have These Same Bucket Teeth Available to List for the "X" Series Buckets.
* Each Tooth is Tempered Solid Steel and Weighs 13lb's!
* Dimensions are 1-1/4" Sq X 29" Long.
* Teeth Overhang the Bucket by 10".
* Teeth are Tapered on both ends.
* Total Weight with Hardware is 113lb's.
Plus We're Glad to Say, These Bucket Teeth Forks are Made in the USA!
