Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> CNC
> South
> New
> Lsp~resuscitator~mtv-100 demand valve~oxygen regulator
Lsp~resuscitator~mtv-100 demand valve~oxygen regulator
LSP~Resuscitator~MTV-100 Demand Valve~Oxygen Regulator
D Cylinder Carrier~Adult Mask~Aspirator~Oxygen Hoses
Description: This listing features an LSP (Life Support Products, Inc.) Portable Resuscitation System. We acquired this unit from the U.S. Military and it is new and has never been used. All components are in their original sealed packaging. The case will accomodate a "D" size or Jumbo "D" size cylinder (not included). This system currently sells for around $1025.00! Here is what you will receive:
* L575 MTV-100/Manually Triggered Ventilator (sealed)
* L270-220 Regulator. Sealed in original box (see info below).
* L099-005 Adult Cuffed Mask, Large Adult Size 5. New in sealed package. "LSP s durable and transparent 099 Series reusable cuffed mask is designed for use with anesthesia and manual or mechanical ventilation."
* Handwheel Wrench for Cylinder
* L535026 (2) each Oxygen Hose Assemblies
* (1) each Adult and Child Airways
L575 MTV-100/Manually Triggered Ventilator: "The next generation of manual ventilators offers the most advanced design in oxygen powered, manually triggered hand held ventilators available. An automatic dual flow rate system delivers 40LPM on manual breaths and up to 115LPM for spontaneous patient breaths. A built in anti-asphyxiation port allows the patient to receive ambient air if the gas source fails. Internal safety feature prevents over pressurization of the patients lungs. Designed to meet the new AHA recommendations."
The LSP Demand Resuscitator Valve is designed to provide 100% oxygen to breathing or non breathing patients in an emergency situation. The valve can be utilized with a mask, endotracheal tube or tracheotomy tube. It operates on a regulated oxygen supply of 40-60 psig." See the picture to the left for specs and complete description.
L063-050 CPR/Demand Resuscitator Valve: "The LSP Demand Resuscitator Valve is designed to provide 100% oxygen to breathing or non breathing patients in an emergency situation. The valve can be utilized with a mask, endotracheal tube or tracheotomy tube. It operates on a regulated oxygen supply of 40-60 psig." See the picture to the left for specs and complete description.
L270-220 Rhino Regulator: Features a CGA870 fitting for use with smaller cylinders such as "B", "D" or "E". "The Life Support Products series of all-brass body oxygen pressure regulators provides enhanced safety features and a greater number of flow selections for the EMS professional. The uni-body construction is designed to strengthen the regulator, minimize potential leak paths, and prevent breakage of the yoke cylinder connection assembly. For additional safety, inlet filters provide gas filtration down to 20 microns. LSP regulators offer 12 flow positions ... more flow selections than ever before. Equipped with two DISS check valves, LSP regulators provide regulated pressure and flow for the operation of two demand valves, or one demand valve and one aspirator, or any pneumatically-powered ventilator. A hose barb outlet permits attachment of a disposable mask, cannula, or bag mask device. All three outlet configurations may be operated simultaneously. LSP Rhino oxygen pressure regulators come with a shock-resistant virtually unbreakable low-profile gauge. The gauge is protected by an aluminum shroud, which is integral to the regulator body and is designed to prevent damage or contamination. A replaceable shroud lens cover also prevents dirt and liquids from contaminating the gauge."
Features two male oxygen DISS check valves and adjustable flow capability through a hose barb outlet. Two DISS high flow ports with check valves for facilitating the use of a demand valve, Auto Vent, Manually Triggered Ventilator or oxygen powered aspirator
