Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> CNC
> South
> Black steel bracket post wall mount sign hangers
Black steel bracket post wall mount sign hangers
BLACK STEEL BRACKET POST WALL MOUNT SIGN HANGERS
This listing is for a lot of 5 new old stock in their remains of the original factory box. They are made of steel. Tiny amounts of the black paint on some of them are cracking, bubbling, or even scratched from storage, as seen. This is barely noticable unless very closely viewed but can be repainted if you choose. They are believed to be made to hang signs typically 22" - 26" wide. Extends approx. 28" from face. Mounting face is about 1-1/2" x 13". Main mounting holes are 12-3/16" apart on center. There are also four holes closer to the middle that are 5-7/16" apart on center vertically and 6-11/16" apart on center vertically. Each of these pairs is 5/16" from the edge of the face, while the main holes are centered. There are twisted openings used to hang the included hardware brackets for a sign which allows it to swing during high winds. The bolt holes are are 7-3/4" and 23-3/4" from the face on center. Bolts are 1/4" diameter. The hardware included displays the follwing: NAPA F0-8700, SUN OIL F0-7918, U-HAUL F0-9509, and AMOCO F0-7414. The box displays "For: Argentina". See pictures for more details and please make sure that this is the part you need, as it is a non-returnable item. Thank you.
fo-9509 fo-7918 fo-8700 hook nib hanging hang mount
