Machine Recycling Discussion and Moderated Newsgroup   >   Full Machines   >   Complete Machines   >   CNC   >   North   >   New   >   Heavy duty backhoe thumb excavator claw hoe clamp 1/2"

Heavy duty backhoe thumb excavator claw hoe clamp 1/2"


Here is the strongest backhoe thumb on the net.It is built from a36 high strength steel cut on a plasma table.The base is a solid piece 3/8" thick that is formed not welded so it is stronger and with this design the stress is on the base not your boom.The bar is 1/4" 2x3 tubing.The teeth bars are 1/2".
It has three positions and folds back out of the way when not in use.
You can bolt it on(grade 5 bolts recommended) or weld it on.
It is 25" x 6 1/2" and the base is 5" x 20"
These weigh 70 pounds.They are heavier than any competitors thumb this size and with the solid one piece base there is no chance of smashing in your hoe's arm.
These are built at a large manufacturing facility that has been open over 60 years.I can get them any size and width.



Heavy duty backhoe thumb excavator claw hoe clamp 1/2 Heavy duty backhoe thumb excavator claw hoe clamp 1/2 Heavy duty backhoe thumb excavator claw hoe clamp 1/2 Heavy duty backhoe thumb excavator claw hoe clamp 1/2