Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> CNC
> North
> Introducing the mc-1230 hydrogen booster kit, 12V 30 a
Introducing the mc-1230 hydrogen booster kit, 12V 30 a
Designed especially for hydrogen boosters, this pulse-width-modulator (PWM) circuit offers precise frequency and current control.
The output current is rated at 30 amperes continuous!
Perfect for electric bicycles, electric scooters, small electric vehicles, lighting and heating control, and now, hydrogen boosting!
* Supply Voltage: 11.0 - 15.0 VDC
* Output Current: 0 - 30 amperes continuous
* PWM switching frequency: 80 Hz - 35,000 Hz (continuously adjustable)
* Approximately 4.4"L x 1.75"W x 2.5" H with heatsink, potentiometers, and connection bolts attached.
* (2) Panel-mount potentiometers (1/4" shaft, 5 k and 100 k )
* (3) #10-24 x 3/4" brass machine screws
* (3) #10 brass flat washers
* (3) #10 bronze lock washers
* (1) Complete circuit schematic, assembly/soldering instructions, and wiring diagram.
* A 12 volt battery or power supply.
* 10 - 12 AWG hook-up wire between the power supply, motor, and controller.
* Circuit wiring, assembly, and soldering skills.
