Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> CNC
> East
> Used
> Ametek-m&g r-50 * dead weight tester * rebuilt & tested
Ametek-m&g r-50 * dead weight tester * rebuilt & tested
AMETEK-MANSFIELD & GREEN R-50 DEADWEIGHT TESTER SET - REBUILT & TESTED
ONE (1) USED, COMPLETELY REBUILT AND TESTED, AMETEK-M&G R-50 DEADWEIGHT TESTER SET WITH A DEADWEIGHT TESTING CAPACITY OF 10,000 PSI. THIS SET INCLUDES THE AMETEK-M&G R-50 PUMP WITH A INTEGRAL HI/LO SELECTOR VALVE WITH A RATED CAPACITY OF 10,000 PSI, DUAL GAUGE MANIFOLD WITH A VERNIER VALVE FOR MAKING FINE, PRECISE, PRESSURE ADJUSTMENTS, WEIGHT COLUMN WITH THE LOW AND HIGH PRESSURE PISTONS, WEIGHT CARRIER, INTERCONNECTING FITTINGS, STEEL CARRY/STORAGE CASE, SIX (6) PIECE TOOL SET AND A COPY OF THE AMETEK-M&G OPERATION, MAINTENANCE AND PARTS MANUAL. NOTE: THE 10,000 PSI TEST GAUGE AND ITS QUICK CONNECT FITTINGS ARE NOT INCLUDED WITH THE SALE OF THIS TESTER. THE TEST GAUGE IS MY SHOP'S CALIBRATED TEST GAUGE. THE TEST RANGES FOR THIS TESTER IS AS FOLLOWS: WITH THE LO PRESSURE PISTON THE TEST RANGE IS 50 - 5,000 PSI AND WITH THE HI PRESSURE PISTON INSTALLED, THE TEST RANGE IS 100 - 10,000 PSI. THE TWO (2) DEADWEIGHT SETS ARE COMPRISED OF THE FOLLOWING: FOUR (4) WG-23 DEADWEIGHTS, FOUR (4) WG-25 DEADWEIGHTS, ONE (1) WG-26 DEADWEIGHT AND EIGHT (8) WG-27 DEADWEIGHTS.
THE DUAL GAUGE MANIFOLD PROVIDES EXCELLENT ADDITIONAL FLEXIBILITY TO UTILIZE THE TESTER AS A GAUGE COMPARATOR TESTER.
THIS TEST EQUIPMENT WAS COMPLETELY REBUILT ON MAY 12 & 13, 2010. AS SHOWN IN THE PHOTOS, THE TESTER WAS PRESSURE TESTED TO 10,000 PSIG. THE PUMP, DUAL GAUGE MANIFOLD, THE WEIGHT COLUMN AND INTERCONNECTING FITTINGS WERE ALL TESTED MULTIPLE 10,000 PSIG PRESSURE-UP/RELEASE CYCLES FOLLOWING OUR REBUILDING OF THIS DEADWEIGHT TESTING EQUIPMENT. ALL OF THE DWT TESTER COMPONENTS (pump, weight column & dual gauge manifold) WERE REBUILT AS DESCRIBED BELOW.
