Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Agricultural
> West
> New
> 18" swg 48" cc cincinnati de od grinder, i.d. att., hyd
18" swg 48" cc cincinnati de od grinder, i.d. att., hyd
18" Swg 48" cc Cincinnati DE OD GRINDER, I.D. ATT., HYD
18" Swing 48" Centers Cincinnati DE OD GRINDER, I.D. ATT., HYD. TABLE, AUTO INFEED, PLUNGE, SPKT,
18" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
W/SWING DOWN I.D. GRINDING ATTACHMENT W/SPINDLE
MODEL: DE S/N: 35326E5Y-0011 NEW: 1969
ORIGINAL AQUISITION COST BY U.S. GOV'T IN 1969 WAS $85,682
SWING OVER TABLE ............................ 18-15/16"
DISTANCE BETWEEN CENTERS .......................... 48"
TABLE SWIVEL, TOWARD WHEELHEAD .............. 9 DEGREES
AWAY FROM WHEELHEAD ........... 2 DEGREES
LOWER SWIVEL LEFT & RIGHT OF CENTER ............ 90 DEG.
UPPER SWIVEL, RIGHT & LEFT ..................... 30 DEG.
MOTOR .......................................... 5 HP
GRINDING WHEEL SIZE ....... 14" WHEEL DIA. X 1-1/2" X 5"
INF. VARIABLE TABLE SPEEDS ............. 3" TO 220" IPM
HAND TABLE TRAVERSE PRE REVOLUTION OF HANDWHEEL
(RAPID/SLOW) ............................ 15/16" / 0.2"
AUTOMATIC INFEED AT TABLE REVERSAL:
LOW ................................. 0.0002" TO .0005"
HIGH ................................. .0005" TO .0125"
WHEELHEAD MOVEMENT PER TURN OF HANDWHEEL:
LOW ............................................ 0.050"
HIGH ........................................... 0.250"
MINIMUM INFEED ON DIAMETER ................... 0.00005"
MOTOR .......................................... 1 H.P.
TAPER HOLE IN SPINDLES ........................ #9 B&S
INF. VARIABLE WORKHEAD SPEEDS .......... 50 T0 500 RPM
SPINDLE NOSE, AMERICAN STANDARD ................... 5"
HEADSTOCK SWIVEL, TOWARD WHEELHEAD ............ 90 DEG.
AWAY FROM WHEELHEAD ....... 30 DEG.
FLOOR SPACE FOR OPERATION:....................72" X 185"
APPROX. DIMENSIONS:............ 166" L-R, 72" F-B, 66" H
APPROX. MACHINE WEIGHT ...................... 12,800 LBS
FULL HYDRAULIC OPERATION FEATURING:
-RAPID ADVANCE & RETRACTION OF WHEEL
"ACU-RITE" "TURNVISION" DIGITAL READOUT DISPLAY
MACHINE WILL ACCEPT AN 14" WHEEL
WORKHEAD SPINDLE IS BOTH LIVE & DEAD
PRESENTLY WIRED FOR 220 OR 230 VOLTS
* PURCHASED FROM THE U.S. ARMY, RED RIVER ARMY DEPOT,
HOOKS TEXAS .... PICTURES WERE TAKEN THERE *
** MACHINE HAS ARRIVED TO OUR HARRISON, NJ WAREHOUSE **
** INSPECT UNDER POWER IN OUR HARRISON, NJ FACILITY **
