Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Agricultural
> West
> Boc edwards tcu 40/80 plus
Boc edwards tcu 40/80 plus
(For Purchase of Multiple TCU Units Discounts Are Available)
The TCU 40/80 is a single-channel temperature control unit engineered for temperature control of remote heat loads. From distances up to 50 feet, the TCU 40/80 can cool the heat load generated by the process equipment. The coolant circulates through the TCU 40/80 , where it is cooled or heated as required, then is transferred to the process equipment, and returns in a closed loop.
* This Unit has a Lomworks Communication Cable Inlet instead of the J72J1 Communications Cable Inlet Provided in the TCU 40/80
* Pump: Iso-Chem Pulse Feeder
* Cooling capacity: @ process equipment; 150 watt coolant line losses; coolant water @ 15.C :Process coolant @ -40.C 350 watts : Process colant @ -20.C to +80.C 2000 watts
* Process Temperature Range: -40.C to +80.C
* Coolant reservoir accommodates 5.0 gallons total.
* Temperature range selectable in increments of 0.1C, with a tolerance of +/- 1.0C
* Power input is by a fused, suitable isolating electrical outlet, 208 VAC, 50/60 Hz, 30 amp, 3-phase delta (balanced load) , 3-wire and earth.
* Captures fluids (internal to the TCU) in the event of a leak.
* Unit sold 100% Certified and Tested.
* Condition: Used but good condition, tested and certified!
* Warranty available - contact ****@chilleruptime.com
Office Hours: Monday - Friday: 8:00 AM - 5:00 Pacific Standard Time (PST)
Warehouse Delivery Hours: 8:00 AM - 4:00 PM Mountain Standard Time (PST)
Please allow a 24 hour response time due to time difference. (See Hours of Operation, above)
We use heat treated wood for pallets and crates on all international orders.
WARRANTY POLICY: This unit does not come with a warranty but available if you contact ****@chilleruptime.com
For all technical questions about our products please contact ****@chilleruptime.com or 541.284.2878
CHILLER UPTIME TECHNOLOGIES, LLC
I would like to introduce you to Chiller Uptime Technologies, LLC
(www.chilleruptime com). We are a company totally dedicated to the repair and
refurbishment of chillers and heat exchangers. It is 100% of our business! Our staff
has more than 25 years of individual experience with the service of chillers and heat
exchangers. They are experts at what they do and do not just do it as a sideline.
Chiller Uptime Technologies goal is to do everything possible to increase your tool
uptime. We accomplish this objective by providing very high quality system repairs
RAPIDLY! And, we guarantee our work! All repaired systems are given a full 100%
check to original manufacturer s specification and a completed test document is
provided with each repaired system. Also, we provide a free diagnosis of the system
upon receipt at our facility with a costed RMA form for your review and approval. We
do no work without your approval, but the diagnosis is always free.
Chiller Uptime Technologies offers repair and refurbishment service for all
manufacturers of chillers and heat exchangers including (but not limited to) Neslab,
SMC, Bay Voltex, Edwards, Lam (and M&W), AMAT 0 and 1 heat exchangers, Daikin
Additionally, we are a fully quality certified and exclusive AMAT repair agent for chillers
and heat exchangers on AMAT tools. We are expanding our coverage in the SF Bay
Area from our new Modesto facility and would like an opportunity to demonstrate for
you how we can improve your tool uptime by increasing your chiller and heat
exchanger availability and reliability.
As an introductory offer we will give you a reduced labor rate of $95/hr. (vs. our
standard rate of $115/hr) and a 17% discount on parts for your first two systems we
Please feel free to contact me Chiller Uptime Service Manager, Tony Luzaich at
****@chilleruptime.com to answer any questions you may have regarding
our capabilities or specific repair requirements you may have.
