Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Agricultural
> West
> Atlas metal slim-line cold-food drop-in unit 4 pan
Atlas metal slim-line cold-food drop-in unit 4 pan
Atlas Metal Slim-Line Cold-Food Drop-In Unit 4 Pan |WCML-4
by Atlas Metal Industries, Inc
Slim-Line Cold Food Drop-In Unit - 4 Pan Size
DESCRIPTION: The WCML series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. The slim-line design can be installed in extra narrow width counters. The unit is used with standard 12" x 20" pans, in the long configuration, and the overall cold pan will require only 16" of clear counter space! The cold pan is available in the standard 4-5/8" depth or the 9-3/4" full depth. The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain.
o Slim-line configuration - it can install in counters only 16" wide
o Fully insulated for maximum efficiency and energy savings
o Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
o Utilizes standard 12" x 20" pans, or fractional size pans, with the use of adapter bars
o NSF certified and UL recognized
TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus pre venting seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable separator channels in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the exterior bottom. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner. The entire unit is removable without the use of tools.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated from 14 gauge galvanized steel and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6' long 3-wire cord and plug (NEMA 5-15P) will be provided . Specifications subject to change without notice.
***IMAGE DISPLAYS SIMILAR ITEM - NOT ITEM ITSELF***
Slim-Line Cold Food Drop-In Unit
Slim-Line Cold Food Drop-In Unit, refrigerated, 4-pan size, self-cont. refrig. system, insulated pan, s/s inner liner & top, galv. steel outer liner
Atlas Metal Adapter Plate (1) 6-1/2in & (1) 10-1/2in |AD-2610
Manufacturer: Atlas Metal Industries, Inc
Adapter Plate - (1) 6-1/2" and (1) 10-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD2610)
Atlas Metal Adapter Plate (2) 8-1/2in Inset |AD-28
Adapter Plate - (2) 8-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD28)
Atlas Metal Adapter Plate (3) 6-1/2in Inset |AD-36
Adapter Plate - (3) 6-1/2" diameter inset holes, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-AD36)
Atlas Metal Adapter Plate Carving Station Sloped Gravy Pan |AD-GP
Adapter Plate - Carving Station with Sloped Gravy Pan, S/S construction, full perimeter beaded edge, NSF certified, fits any standard 12" x 20" opening (ATM-ADGP)
Atlas Metal Adapter Plate Carving Station Slope Gravy Pan |AD-GPD
Adapter Plate - Carving Station with Sloped Gravy Pan - Double Width, S/S construction, full perimeter beaded edge, NSF certified (ATM-ADGPD)
Atlas Metal Adapter Plate 16-1/2in Inset |AD-18B
Adapter Plate - 16-1/2'' diameter inset hole, S/S construction, full perimeter beaded edge, NSF certified (ATM-AD18B)
Atlas Metal Adapter Plate 18-1/2in Inset |AD-21B
Adapter Plate - 18-1/2'' diameter inset hole, S/S construction, full perimeter beaded edge, NSF certified (ATM-AD21B)
Atlas Metal Corian Top (1) 16in Cut-Out |CTS
Corian Top, with (1) 16" cut-out, 1/2" thick, Cameo white, use with SF-22 (ATM-CTS)
Atlas Metal Adapter Frame S/S 22in x 27-5/8in |SF-22
Adapter Frame, 22" x 27-5/8", stainless steel, use with CTS (ATM-SF22)
