Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> Agricultural
> South
> Wago canopen eco fieldbus coupler w/ end modules
Wago canopen eco fieldbus coupler w/ end modules
CANopen ECO Fieldbus Coupler MCS
with lot of 10 Wago End Module 750-600
750-347 CANopen ECO field-bus coupler MCS
10 kbit/s to 1 Mbit/s, digital and analog signals
The ECO field-bus coupler is designed for applications with a reduced scale I/O requirement. Using digital only process data or small amounts of analogs, while retaining all of the choice that is offered by the series 750 I/O.
The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts are supplied via a separate supply module. The CANopen bus coupler is capable of supporting all I/O modules and automatically configures, creating a local process image.
The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen field-bus to the PLC, PC or NC for further processing, and received from the field via CANopen.
The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the bus coupler. The bits of the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital information exceeds 8 bit, the buscoupler automatically starts with a new byte.
All entries of the object dictionary can be mapped as the user likes in the five RPDOs and five TPDOs.
The complete input and output process image can be transmitted using SDOs.
"Spacer modules" can be set via software.
