Machine Recycling Discussion and Moderated Newsgroup > Full Machines
> Complete Machines
> 16 watt 925-960 mhz rf power amplifier MHW916
16 watt 925-960 mhz rf power amplifier MHW916
UHF SILICON FET RF POWER AMPLIFIER
UN-USED REMOVED FROM NEW EQUIPMENT GUARANTEED GOOD
Designed specifically for the European Digital Extended Group Special
Mobile (GSM) Base Station applications in the 925 960 MHz frequency range.
MHW916 operates from a 26 Volt supply and requires 15.5 dBm of RF input
Specified 26 Volt Characteristics
RF Output Power: 16 Watts at 1.0 dB Compression Point
Meet GSM Linearity Specification for Base Station up to 12.5 Watts
MAXIMUM RATINGS (Parameter Symbol Value Unit)
Operating Case Temperature Range TC 5.0 to +85 C
Storage Temperature Range Tstg 30 to +100 C
Standby Current (Pin Removed, Istdby = IS1 + IS2) Istdby 400 mA
ELECTRICAL CHARACTERISTICS (TC = 25 C, VS1 = VS2 = 26 Vdc, Vbias = 15 Vdc, 50 ohm system)
Characteristic Symbol Min Typ Max Unit
Frequency Range BW 925 960 MHz
Quiescent Current (Pin = 0 mW) Idq1 + Idq2 400 mA
Power Gain (Pout = 16 W) (1) Gp 26.5 30 32.5 dB
Output Power at 1.0 dB Compression P1dB 16 W
Efficiency (1.0 dB Compression Power) h1 37 44 %
Efficiency (Pout = 16 W) (1) h2 33 39 %
Input VSWR (Pout = 16 W) (1) VSWRin 2:1
Harmonic 2 fo (Pout = 16 W) (1) H2 40 35 dBc
Harmonic 3 fo (Pout = 16 W) (1) H3 60 45 dBc
Ripple (Pout = 16 W) (1) Rp 1.0 dB
Load Mismatch Stress (Pout = 16 W)
Load VSWR = 5:1, All Phase Angles Y No Degradation in Output Power
Stability (Pout = 10 mW to 16 W)
Load VSWR = 3:1, All Phase Angles (Except Harmonics)
Than 60 dB Below Desired Signal
Stability (Pout = 5.0 dBm to 42 dBm, f = 925 to 960 MHz)
Load VSWR = 2:1, All Phase Angles
All Spurious Outputs Lower Than 46 dBm or
85 dBc (Whichever the Higher)
(1) Adjust Pin for Specified Pout.
YOU CAN FIND THE COMPLETE DATASHEET HERE:
www.datasheetcatalog.org/datasheet/motorola/MHW916.pdf
