Machine Recycling Discussion and Moderated Newsgroup > Components
> Wheels and Bearings
> West
> Used
> Concrete fiber monofilament reduce cracks 1 bag cu yard
Concrete fiber monofilament reduce cracks 1 bag cu yard
THIS FIBER COMES IN A 1 LB. BAG ENOUGH FOR 1 CUBIC YARD OF CONCRETE
NEED DIFFERENT QUANTITIES THAN I HAVE LISTED. EMAIL ME AND I WILL GET YOU A PRICE
IT IS EASY TO HANDLE AND STORE. AVAILABLE WHEN YOU NEEED IT
I Sell Ready Mix Concrete and have done hundreds of concrete jobs. This Fiber is the only way to go
Monofilament fibers- Engineered Fibrous Concrete Reinforcement System 100% virgin monofilament fiber containing no reprocessed olefin materials and specifically engineered and manufactured for use as secondary reinforcement in ready mix concrete and cement-based building products at the minimum recommended dosage rate of 0.067% by volume (1.0 lb. per cubic yard /.45 kg per cubic meter), Fibers meet the material specifications described in ASTM C-1116, Type III, Section 4.1.3 Synthetic Fiber-Reinforced Concrete and Shotcrete .
* Alternate reinforcing system for welded wire fabric when used for non-structural temperature and shrinkage crack reinforcement in hardened concrete
* Inhibits and controls the formation of cracks caused by intrinsic stresses
* Increases impact, shatter and abrasion resistance of concrete
* Reduces segregation, plastic settlement and shrinkage cracking
* Increases fatigue resistance and toughness in hardened concrete
* Reinforces against water migration; reduces permeability of concrete
* Provides modest residual strength.
Monofilament fibers can significantly enhance the performance of all types of concrete and cement based building products:
The typical application rate of Monofilament fibers is 1.0 lb per cubic yard/ .45 kg per cubic meter of concrete added directly to the concrete mixing system before, during or after the batching of the other ingredients and mixed at the time and speed recommended by the mixer manufacturer (usually four to five minutes / 70 - 80 revolutions. Rotate drum at MIXING speed. Material and fibers do not mix at drum transit speed). Additional mixing does not adversely affect the distribution or overall performance of fibers.
The addition of fibers at the recommended dosage rates to a given mix may appear to decrease the slump. The workability, however, will not be affected and additional water should not be added.
The addition of Fibers at the normal recommended dosage rate does not require any mix design changes.
Fiber reinforced concrete can be finished by any finishing technique. Fibers do not affect the finishing characteristics of concrete. They are non-corrosive, alkali proof and will not stain the concrete surfaces. Fibers are compatible with power troweled, hand troweled, colored, stamped, dry shake and broom finished concrete.
Fibers are compatible with all concrete admixtures and performance enhancing chemicals.
ITEM CONDITION: This item is brand new
COMMUNICATION: I generally respond to emails once a day usually in the evening. Please allow 24-36 hours for an email response. If you do not receive an email response within that time period please re-email me as sometimes emails get sent to junk-mail for some reason and although I try to check that folder sometimes they can get missed there.
