Machine Recycling Discussion and Moderated Newsgroup > Components
> Wheels and Bearings
> South
> Varimixer W100PL vertical mixer, 105 quart floor model,
Varimixer W100PL vertical mixer, 105 quart floor model,
Vertical Mixer, 105 Quart Floor Model, Variable Speed
Mixer, Food, 105-qt. capacity bowl, variable speed drive, 4 HP motor, silver-gray hammertone powder paint finish, includes: power bowl lift, s/s bowl, s/s dough hook, s/s wire whip, alloy flat beater, bowl truck, 15-min. timer, bowl screen
* Mixing system - The VARIMIXER W100PL is a planetary mixer with a variable speed drive system.
* The mixer frame consists of a column with welded-on feet, and a top traverse closed by a stainless steel cover.
* The bowl is mounted in bowl arms which are manually raised and locked simultaneously - or lowered and opened, respectively. The column contains the motor and the bowl arm mechanism.
* The top traverse contains the transmission system consisting of the moveable pulleys, the intermediate belt drive and the planetary head.
* Start and stop push buttons are mounted on the frontplate along with a 15-minute electrical timer with a HOLD feature.
* Mixing tools are mounted in a bayonet shaft in the planetary head.
* Construction - Mixer frame of heavy-gauge, welded, rolled steel plate. Durable powder coated finish used on those surfaces not constructed of
* stainless steel. Top cover, splash apron and planetary head cap in heavy-gauge stainless steel.
* Bowls in stainless steel.
* Mixing tools in cast aluminum or stainless steel.
* Bayonet shaft in stainless steel.
* Variable speed V-belt transmission based on precision machined cast iron pulleys.
* Springloaded moveable pulleys in the variable speed drive for automatically adjusting of the tension of the special V-belt.
* Planetary mixer head of unique design. The planetary head revolves in
* heavy-duty ball and needle bearings around the main shaft. Precision milled beveled gear on the main shaft engages the bayonet shaft and the fixed internal gear ring through a double set of milled gears obtaining extra high torque capabilities of the mixing tools.
* Precision milled cast iron bowl arms lower and raise the bowl and clamp it in a precise position relative to the mixing tool allowing for small
* tolerances between tool extremities and the bowl.
* Variable speeds from 50 to 250 RPM
* Overload protection and no voltage release
* No bowl adaptors required for the downsize bowls
* Locking pin on tools instead of shaft.
* Neoprene feet to minimize walking and rusting
* Permanently lubricated planetary head and attachment hub case
* 15-minute timer with HOLD feature
* Stainless steel 100-qt. bowl, wire whip and dough hook
