Machine Recycling Discussion and Moderated Newsgroup > Components
> Wheels and Bearings
> South
> Used
> Conoflow manual loading regular GH10XTHCXXXD brass
Conoflow manual loading regular GH10XTHCXXXD brass
NEW ITT FLUID TECHNOLOGY CONOFLOW CORP. part no. GH10XTHCXXXD BRASS
Conoflow s GH10 Manual Loading Regulators are precision
units designed for use in laboratory environments,
remote loading of pneumatic devices, speed changers
and other general purpose applications.
Available in brass, l construction
and combinations of the same, the GH10 Regulators
cover a wide variety of applications. Maximum
supply pressure ratings on the brass units are 200 PSI
(1379 kPa) . The brass units use Buna N
diaphragms with Teflon/Buna N diaphragms with
Teflon/Buna N sandwich type diaphragms used in the
stainless steel models. Other diaphragm materials are
available upon request. Regulated pressure ranges of
0-3, 5, 15, 25, 35, 50 and 125 PSI (0-21, 35, 103, 172,
241, 345, and 862 kPa) are standard. For precise and accurate regulation the
diaphragms incorporate a relief and constant bleed feature. The constant bleed is
an engineered orifice to increase sensitivity by keeping the nozzle plug in a
dynamic state, nullifying hysteresis and deadband. For applications with corrosive
and/or toxic media, the regulators are available with a no bleed/no relief diaphragm
which maintains the medium in the system. Tapped bonnets are available for
remote venting of the exhaust gas.
Each unit has two 1/4 NPT connections and can be line, wall or flush-back
panel mounted. The easily adjustable handwheels are standard with wrench knob,
preset and tamperproof options available.
The GH10 Series Regulators are also used in the Conoflow GPH Series Manual
Loading Stations. Each station comes completely assembled and includes the regulator,
panel and 3.50 gauge. Standard ranges are 0-15, 0-30, 0-60, 0-100, and
0-160 PSI (0-103, 0-207, 0-414, 0-690, and 0-1103 kPa) and 3-15 PSI (0-100%
Widely used in remote positioning of actuators and other pneumatic devices,
the GPH Stations are available in panel sizes of 5.00 x 5.50 (GPH05), 6.00 x
6.00 (GPH06), 5.00 x 10.00 (GPH10XX), and 5.25 x 13.50 (GPH10XY). The
GPH10XY version incorporates a manual/automatic switch for manual or automatic
These products are guaranteed by Conoflow s high standards of manufacture
and years of experience as a leading producer of precision instruments.
