Machine Recycling Discussion and Moderated Newsgroup > Components
> Wheels and Bearings
> East
> Pixelink pl-A782 6.6 mp color vision camera with lens
Pixelink pl-A782 6.6 mp color vision camera with lens
Description of PixeLink PL-A782
The PL-A782 is a high-resolution, 6.6 megapixel (2208 x 3000) camera designed specifically for industrial inspection applications. Fully IIDC 1.31 (DCAM) compliant, the PL-A782 uses a standard FireWire interface for plug-and-play operation with the host computer. The high resolution allows the camera to be used to resolve small features while maintaining a large field of view. Region of interest controls and multiple decimation modes make the PL-A782 a flexible choice. Features such as trigger and general purpose output controls add a level of functionality beyond the IIDC standard, providing excellent performance for the price. On board Flat Field Correction provides image quality similar to high-end CCD cameras.
* 6.6 Color Megapixel Resolution
* IIDC 1.31 (DCAM) Compatible with Extended Features
* External Trigger (TTL to 12 V)
* Fully Supported by Software, for Operation "Out of the Box"
* 1" CMOS 2208 x 3000 resolution (7.73 mm x 10.50 mm - 13.1 mm diagonal)
* Spectral Range 400 1000 nm
* Dynamic Range 56 dB linear (TBD)
* S/W or H/W (external) trigger (TTL to 12V)
* Two user-programmable outputs that can be used stand-alone or synchronized to trigger
Exposure (0.063 ms to 2 seconds)
White balance and color gains
Brightness (black level adjust)
* Frame Rate (2 fps to max)Trigger & Strobe Modes
* Region of Interest & Decimation
* Pixel format 8-bit or 10-bit
* On-camera configuration memory
* FPN and PRNU correction (gain/offset correction, flat field correction per pixel)
Two FireWire (IEEE 1394) connectors allow daisy chaining of the camera
* Standard C-mount 1" optics (Compatible with most 2/3" optics.)
* IR cut-off protective filter
* M3 threaded holes 4 in front plate around C-mount and 4 in camera base
* Power supplied over the FireWire bus
Standard Configuration (PL-A782)
H x W x L: 1.65" x 1.97" x 4.02"
* Vibration 10 G (20 to 200 Hz)
* Temperature 0 C to 50 C (non-condensing)
* Signals indicate idle, operating, warning and failed status
