Machine Recycling Discussion and Moderated Newsgroup > Components
> Wheels and Bearings
> East
> Allen-bradley 1794-OV16 - 24VDC output module flex i/o
Allen-bradley 1794-OV16 - 24VDC output module flex i/o
16-Channel 24VDC Flex I/O Module, Sinking
Number of Outputs: 16, nonisolated, sinking
Module Location: Cat. No. 1794-TB3, -TB3S
On-state Voltage Range: 10V dc minimum; 24V dc nominal; 31.2V dc maximum
Output Current Rating: 8.0A (16 outputs @ 0.5A)
Indicators: 16 yellow status indicators
Fusing: Module outputs are not fused. Fusing is recommended. If fusing is desired, you must provide external fusing.
Terminal Base Screw Torque: 7 pound-inches (0.8Nm)
1. The FLEX I/O module plugs into the terminal base, connecting to the I/O bus and field devices. Since there is no direct wiring to the I/O module, you can remove and insert modules under power, enabling you to change modules without disturbing field wiring, other I/O modules, or system power. This eliminates costly downtime and the inefficiencies of restarting a system.
