Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> West
> Avortec CT520Z tig welder, arc welder and plasma cutter
Avortec CT520Z tig welder, arc welder and plasma cutter
AVORTEC CT520Z TIG Welder, ARC Welder, And PLASMA CUTTER
INDUSTRIAL STRENGTH | PROFESSIONAL GRADE | DIGITAL SERIES
SPECIAL OFFER - FREE WELDING HELMET - Auto Adjusting, Auto Dimming For Welding and Plasma Cutting
TIG Welder - 200 AMP TIG Welder
ARC/MMA Welder - 200 AMP ARC Welder
Plasma Cutter - 50 AMP Plasma Cutter
Advanced Power Technology Built In - Hi-tech Circuity
* 95%+ Duty Cycle allows you to cut and weld continuously.
* Cuts And Welds Most Metals Quickly And Easily
* Digital Controls And DUAL LED Digital Display!
* Digital Air Pressure Gauge
* Digital Internal Temperature Gauge
* TIG Welder - Uses a special Tungsten tip, Argon gas, and electricity to weld metal.
* ARC/MMA Welder - Use standard welding rods to weld metal including steel, and aluminum.
* Plasma cutter uses plasma arc and compressed air to cut metal easily
* New And Improved plasma cutter torch and extended-life silver plasma torch tips outlast the industry standard tips 30-1.
* Electronically Activated Plasma Torch Handle - Simply click-to-light .
* Easily cuts metal up to 1/2" and even 5/8". This model will cut up to 1" steel.
Easily cut almost any metal including: steel, stainless steel, aluminum, brass, copper, iron and cast iron. Clean, accurate cuts.
* Power Supply - 220V/50A Power Supply. 220V/Single Phase. *Requires 50 Amp circuit breaker.
Outperforms most standard 110V/220V welders and plasma cutters. We have tested other manufacturers 110/220V welders and plasma cutters and found they do not perform on standard 110/15Amp circuits. A 220V/40 50Amp circuit breaker is recommended to perform as specified.
* Air Regulator/Air Filter - Adjust air pressure and cleans the air coming into the unit
* 3-Way Valve (Patent Pending) Allows you to us both Plasma Cutter and TIG by switching between bottle gas (Ar) or compressed air from the air compressor without disconnecting either one.
Ultimate Welder and Plasma Cutter
The AVORTEC Advanced Power Technology wedler and plasma cutter represents a leap forward in metal fabrication equipment. With digital controls for accurate cuts and welds on a broad range of materials everytime you will increase your productivity and quality on everything you cut and weld.
Digital Controls With DUAL LED Readout Display
Shows Modes: Plasma Cutter, ARC Welder or TIG Welder
FULL DIGITAL CONTROLS allow you to select modes, adjust AMPERAGE and display air pressure (PSI).
AVORTEC CT520Z TIG Welder, ARC/MMA Welder, Plasma Cutter, Multi-function Unit
Advanced Electronically Activated Plasma Torch Handle - 17 Ft. Hose and Cable
Extended Life Silver Plasma Torch Tips
* TIG Torch Welding Handle - 10Ft. Hose and Cable
* ARC/MMA Welder Electrode Holder Handle - 8 Ft. Cable
* Grounding Clamp - 17 Ft. Cable
* Power Cable 220V - 8 Ft. with 220V/50A Plug
* 3-Way Valve (Patent Pending) Allows you to finish more work more efficiently with both TIG
and Plasma cutter without disconnecting gas or air lines.
1 Year AVORTEC Manufacturer Warranty.
We engineer these to be the best and stand behind our products.
We can show you how to use the product and demonstrate its capabilities when you pick up locally.
We test all products to be the best in durability, warranty, style, utility and value.
2002-2010 AVORTEC and AVORTEC.com is a registered trademark of AVORTEC Corporation. All rights reserved. All other trademarks
are the property of their respective owners.
