Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> South
> 26" swg 120" cc birmingham dlc-26120 special deal engin
26" swg 120" cc birmingham dlc-26120 special deal engin
26" Swg 120" cc Birmingham DLC-26120 Special Deal ENGIN
26" Swing 120" Centers Birmingham DLC-26120 Special Deal ENGINE LATHE, 10 HP, 16 Speed, 4-1/8" Sp
Model: DLC-26120 w/Removable Gap Block
Note: the photo shows the 26" x 80" centers model
Special deal includes Free Delivery to all the lower 48
States and a Free Taper Attachment (installed)
10 HP motor delivers power thru all spindle speeds
Spindle gears, shafts and bearings are lubricated by pumped bath of oil
D1-8 Camlock spindle with 4-1/8" spindle bore
16 Spindle speeds, 26 - 1,700 RPM
Rapid power traverse to carriage and cross slide
Multiple disc clutch for efficient spindle starting and reversing
Swing over cross slide: 17-3/8"
Spindle nose type (Camlock): D1-8
Spindle speed range: 26 - 1,700 RPM
Spindle center to bedway: 12-3/4"
Threads per inch (No.) range (TPI): (42) 7/16 - 80
Metric threads (No.) range (mm): (37) 0.5 - 80
Module threads (No.) range (mm): (32) 0.25 - 40
Diametral threads (No.) range (DP): (42) 7/8 - 160
Long. feeds (No.) range (in/rev): (45) 0.0017 - 0.058
Cross feeds (No.) range (in/rev): (45) 0.0009 - 0.029
Leadscrew diameter (in): 1-9/16"
Main drive: 10 hp, 220/440V 3 ph
Maximum workpiece weight: 1,100 lbs.
12" 3 Jaw Chuck with reversible jaws
Steady rest capacity 6" - 12""
Follow rest capacity 3" - 8-1/2
Coolant System w/Full Length Splash Guard
12" Steady rest with roller jaws
