Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> North
> Used
> Wilson 2000 series mobile cb antenna "white"
Wilson 2000 series mobile cb antenna "white"
Center Loaded Antennas Trucker 2000/SW-2000
WHY THE Wilson "Trucker 2000" PERFORMS BETTER
The Wilson 2000 Trucker s higher gain performance is a result of several new design developments that bring you the most powerful CB center loaded antenna available in its price range.
The first priority was to reduce the dielectric loss by removing as much of the plastic inside the coil as possible. This was accomplished by suspending the coil in air, supported only at four small points, 90 degrees apart, in effect removing 95% of the plastic from the inside surface of the coil. This reduced the dielectric loss to a negligible amount.
The second priority was to get rid of the resistive heat loss in the coil. Since most of the RF energy at 27 MHz travels on the surface of the wire, it was decided to increase the surface area by making the diameter of the wire a larger 10 gauge copper. Since silver is a much better conductor than copper, although very expensive, the wire was heavily silver plated. This reduced the resistive loss to a minimum. Any power loss in the coil is practically eliminated in the Wilson 2000 Trucker.
The 2000 Series is a stainless steel "centered loaded" coil, mobile C.B. antenna that offers the performance & reliability that drivers are increasingly demanding from their antennas.
Standard 3/8" x 24 chromed brass ferrule
A patented low loss air wound coil design
Uses 10 gauge silver plated wire
Coil is made of high impact engineering thermoplastic
Frequency range is from 26 to 30 MHz
Static reducing weather cap
