Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> East
> Used
> Miller trailblazer 302 welder 907216 & helmet special
Miller trailblazer 302 welder 907216 & helmet special
The professional's choice for flawless multi-process arc performance and code-quality welds. The Trailblazer 302 delivers more CV to enhance Stick welding performance while MIG and FCAW performance is superior with any wire. The unbeatable Trailblazer 302 has an added AC output for TIG aluminum welding. And, professionals with a Trailblazer get more work done because it features two GENERATORS! One 4-pole, 3-phase generator provides a smooth welding arc, while the second provides strong auxiliary power in which there is no interaction between the welding arc and power tools.
New! Quietest engine drive in its class. Fully enclosed case protects the engine and decreases sound levels by 1/3 over previous models. Removable service doors provide easy access for engine maintenance.
10,500 watts of Accu-Rated - Not Inflated generator power. Cranks out enough power for most applications: job site, farm/ranch, or home. `10500 watts of continous power.
Exclusive! Trailblazer Series offers the ONLY two-generator system - one for welding and one for generating power - meaning no interaction between tools and the welding arc, and it has the strongest generator power while welding.
Legendary four-pole rotor and 3-phase weld output for the smoothest, most stable and flawless multi-process arc in their class. Now with preset DIG settings (Stick), Adaptive Hot Start , and Lift-Arc /Scratch Start TIG with Auto-Stop .
Exclusive! Digital Meters with SunVision technology for easy reading in direct sunlight or shade. Self-calibrating digital weld meters with meter maintenance functions.
Larger Fuel Capacity. New 12-gallon tank can keep the generator running for 14 hours with a 4000-watt load. Exclusive Smart Fuel Tank is designed to minimize the chance of back splash when refueling.
Exclusive! Super-tough Protective Armor with receptacle and output stud covers made from XENOY make the Trailblazer virtually indestructible. Other XENOY applications include: automotive bumpers, tractor hoods, lawn mower decks, etc...
Simply touch the tungsten to the work piece lift and the arc is initiated instantly and automatically without the use of high frequency.
Machine makes small adjustments to increase overall arc performance in all conditions and weld processes.
Fueling is easy with the smart fuel tank since it minimizes the chance of fuel backflow.
Four Pole - Three Phase Weld Output
True multiprocess CC or CV output is perfect for the professional welder, producing X-ray quality Stick, MIG, and TIG welds. Its four pole, three phase welding arc is the smoothest, most stable arc in its class.
Our alternator and generator are comprised of iron and copper to stand up to the challenges of your welding needs.
Idles engine 3-4 seconds after starting to extend engine life and reduce fuel consumption.
Accu-Rated - Not Inflated Generator Power
Miller provides the strongest and most reliable generator power. Our Accu-Rated, not inflated, standard or measuring generator power guarantees delivery of all the power its machine promises.
Miller offers the ONLY two-generator system, one for welding and one for generating power - meaning no interaction between tools and the welding arc. This system is the most efficient - producing the best quality arc and the strongest generator power while welding.
This technology makes it easier to read digital meters in direct sunlight or shade.
Scratch Start TIG with Auto-Stop allows the arc to be stopped without the loss of shielding gas.
Automatically switches from Panel to Remote Amperage/Voltage (A/V) control with remote connected. Eliminates confusion of the Panel/Remote A/V switch.
Service TrucksSmartSelector - Product Selection Made Easy
* Air Carbon Arc (CAC-A) Cutting and Gouging (3/16 in carbons)
* Air Plasma Cutting and Gouging (PAC) with Optional Spectrum Models
* No. 4B Running Gear: For Blue Charger NT, Bobcats, Miller Legend NT and Trailblazers - Two rear wheels with 480/400x8 pneumatic tires. Two 8 in (203 mm) solid rubber tired front wheels and 32 in (813 mm) towing handle. Part # 041930.
* HF-251D-1 High-Frequency Arc Starter and Stabilizer: Portable 115 Volt, 250 amp unit , 60% duty cycle unit adds high-frequency to the welding circuit to help start the arc when using the TIG process. (requires Secondary Contactor and RMLS-14 Switch). Part # 042388.
* FA-7.5 Flame Arrestor Fuel Cap (Gasoline Red) : Lockable for added protection.. Part # 042632.
* No. 27 Hand Running Gear: Rugged, lightweight design provides maximum maneuverability. Comes with standard handle, two large 480/400 x 8 pneumatic tires, two 5 in rubber swivel casters, adjustable axle and easy-to-read instructions. Shown with optional LP tank moutning bracket. Part # 043014.
* Cylinder Rack: For use with No. 4B or No. 27 Running Gear - Consists of base tray with bottle bracket, and vertical support rack with safety chain. Note: Cannot be used with LP Tank Mounting Bracket. Part # 043040.
* Spark Arrestor : Mandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other areas, check your state and local laws. Part # 043579.
* LP Tank Mounting Bracket (Horizontal) : Includes brackets and clamps to mount the tank and hose with fittings to converter. For 33 or 43 lb tanks only. For use with No. 27 or No. 4B Running Gear. Cannot be used with Cylinder Rack. Part # 043647 .
* Stick Welding Leads : Includes 100 ft stinger, 50 ft
* RHC-14 Hand Control: Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. For all Miller solid-state power sources. Part # 129340.
* Spoolmatic 30A Spool Gun: Ideal for aluminum welding jobs. 200 amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. Part # 130831.
* WC-24 Weld Control: The WC-24 easily mounts directly on the power source. It's designed for use with Miller CV power sources supplying 24 VAC and 14-pin receptacles. Includes a board-mounted potentiometer that can alter motor acceleration rate to optimize arc starting. Part # 137549.
* RCC-14 Remote Contactor and Current Control: Side-to-side rotary-motion fingertip control fastens to TIG torch using two Velcro straps. Includes 26.5 ft (8 m) contol cord and 14-pin plug. Great for production or contractors that need quick ramp-up. Part # 151086.
* Stick Welding Leads : Includes Includes 50 ft 2/0 electrode cable and holder, 50 ft work cable and clamp, 350 A, 100% duty cycle. Part # 043851.
* Suitcase 8 VS Wire Feeder : At less than 25 lb and fits through a 18 x 24 in porthole. The small modular design and tough flame-retardant, non-metallic case material will withstand burning, breaking or losing rigidity with heat or sun. Part # 194890.
* Suitcase8 RC : Wire feeder. Part # 194938.
* Suitcase12 RC : Wire feeder. Part # 194940.
* Suitcase 12 VS Wire Feeder : At less than 30 pounds, this lightweight, portable feeder can withstand the harshest environments, and it allows you to use a 12-inch spool of wire. Fits through an 18x24 inch porthole. Part # 194941.
* Hwy-1000 Trailer: This 1000 lb (454 kg) capacity highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension comes with jack stand, 2 in (50 mm) ball hitch, fenders and lights. Part # 195013.
* Protective Cover : Engine Drive 18W x 48L x 26H - Heat-resistant blue protective cover with reinforced sleeve for exhaust pipe. Easy-off handles, easy-access cable cutouts, and tie down grommets secure cover for transport. Part # 195136.
* Stick Welding Leads : Includes Includes 50 ft No, 2 electrode cable and holder, 50 ft work cable and clamp, 200 A, 100% duty cycle. Part # 195195.
* Onan by Robin: Performer OHV, Gasoline - V-twin-cylinder, 4-cycle, overhead valve, industrial, air-cooled.
* Kohler: CH 20 OHV, Gasoline or LP - V-twin-cylinder, 4-cycle, overhead valve, industrial, air-cooled.
120 / 240 VAC, 84 / 42 A, 60 Hz.
