Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> East
> New
> Air hose & cable trolley
Air hose & cable trolley
* Adjustable for flange widths of 2.33 to 5.00
* Air hose clamp adjustable to fit a to 1-1/2 diameter hose
NOTE: Maximum Loading of 35 Pounds of Hose Per Trolley
Hose trolleys are used to support the hose which supplies air to an I-beam mounted hoist. The trolleys also mount on the I-beam. They support the air hose in intervals of 5 to 10 feet, suspending it above the work area thereby leaving it clear and unobstructed. This very flexible air supply system can be used in most any arrangement of straight, curved, fixed or traveling I-beam sections. As the hoist is moved along the beam, the trolleys are pulled by the hose. As the hoist is moved back the trolleys are pushed together and the hose falls in loops between the trolleys.
Construction: Hose trolleys are built for durability under constant use. The wheels have sealed precision bearings and are very free-running. Slots in the base plate of the trolley allow adjustment to permit use on beams of various types. In spite of adjustability, wheel assemblies are rigid at all times. Bumpers extend beyond the wheel flanges preventing interference with adjacent trolleys and offering protection to the wheels.
Specifications: Both trolleys are adjustable to fit beam width 2.33 to 5 inches.
Hose clamp is adjustable to fit to 1-1/2 inch hose.
Two-wheel trolleys require installation of the hose clamp and wheel assemblies.
The "ALL-AMERICAN" Hoist Trolley Assembly
