Machine Recycling Discussion and Moderated Newsgroup > Components
> Structural Parts
> East
> 10-pin mini-din yaesu ft-950 ft-450 to tokyo hy-power
10-pin mini-din yaesu ft-950 ft-450 to tokyo hy-power
with auto Band Switching DIN plug for
TOKYO HY-POWER linear amplifier.
(Also available are other transceiver and
linear connector cable combinations requiring
DIN / MINI DIN to DIN / MINI DIN cables & plugs).
TRANSCEIVER TO LINEAR amplifier control cable
with RCA plug cable ends for amplifier keying and ALC
plus a DIN plug for auto band switching control of the
(I can provide different DIN / MINI-DIN plugs to interface to other linears as needed.)
RCA plugs plus a DIN plug at the other end. I have discovered that this particular
using a special new 10 pin Mini DIN plug and a molded RCA cable
and an added multi-wire cable, both about 6 to 7 feet long.
The Mini DIN connector is assembled with heat shrink tubing over each soldered pin.
to further isolate the contact pins from the shield.
A third layer of heat shrink tubing is added to create strain relief for the cable.
The DIN band control plug end is assembled in the same way.
(I also have the 8-pin Mini-DIN cables without the band control DIN plug
the ALC cable and the DIN auto band control plug.
As with all Mini DINs and DINs, they must be aligned and inserted carefully.
*The 10-pin Mini DIN, with LINKEY, ALC and Band Control DIN
