Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> East
> Southbend hdg-24 24" gas griddle w/ ss stand on casters
Southbend hdg-24 24" gas griddle w/ ss stand on casters
Stainless Steel Cart including Under shelf and Casters
Griddle, Gas, Counter Model, 24" wide, 1" thick polished steel plate, electronic ignition (battery), (2) thermostatic controls range 150 - 400 F settings, s/s front & sides, 4" s/s legs, 60,000 BTU
* 30,000 BTU (NAT or LP) burner per 12"
* Gas Heat Control System: Each foot of griddle is heated by a "U" shaped burner. Each burner is controlled by a thermostatic control and is equipped with an independent pilot. For safety, each pilot has a flame failure device. A 3/4 rear gas connection is standard. Units over 48 wide are constructed of two bodies.
* Electronic spark ignition (battery)
* Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
* Reinforced, insulated double wall sides
* 1" thick polished rolled steel plate
* 5" high rear and side splash guards
* Flame failure safety device
* 3/4" rear gas connection and pressure regulator
* "Insta-on" thermostatic controls for precise settings between 150 F and 400 F
* Imbedded load sensing thermostat
* Exclusive NO COLD Zone -Uniform heat distribution across surface
* Each burner equipped with runner tube
* 4" Spatula width front grease trough
* Hidden grease drawers with large capacity
* Fully welded griddle plate with protected exhaust vent
* Manufacturer: Southbend Range
* Includes quick connect/disconnect as shown.
* Griddle is mounted to the cart.
PhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucketPhotobucket
