Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Mechanical Control Parts
> East
> Fluke networks 620 lan cable meter CAT5 coaxial tester
Fluke networks 620 lan cable meter CAT5 coaxial tester
* Fluke 620 Cable Identifier
* Fluke 620 Quick Reference Card
Fluke Networks 620 LAN Cable Meter
Comes in Original Factory Box!
The Fluke 620 LAN CableMeter (hereafter the test tool) is a battery operated, handheld instrument that identifies cable failures, measures length, and checks the wiring of cables used for DeviceNet, ControlNet, and Ethernet Local Area Network (LAN) systems. The test tool is designed around a Test as You Go philosophy. This reduces the time necessary to install and service LAN cables by allowing ONE PERSON to detect most cable failures from only one end of the cable. The test tool tests for incorrect pairing (split pairs), mis-wires, shorted and open wires on all twisted pair cables, as well as shorts on coaxial cables.
* Only requires single-person verification
* Tests all LAN cable types: UTP, STP, FTP, Coax
* Detects a multitude of wiring problems: open, short, crossed, reversed, split pair
* Locates wiring/connection errors (distance to the open or short)
Range: 1 to 999 ft or .5 to 300m
Two AA size 1.5 volt alkaline batteries
50 hours of continuous operation, not including backlight consumption. Automatic Power Management Feature: Provides several months of operation with one set of batteries under normal use.
The inputs withstand telephone ringing and loop voltages. The instrument warns the user with an "Active Cable" message and an audible warning tone.
18.4 x 9.8 x 4.6 cm (7.25 x 3.87 x 1.8 in)
