Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> System sensor spectralert P2430 hornstrobe red wall mnt
System sensor spectralert P2430 hornstrobe red wall mnt
24-volt strobe models: 15, 15/75, 75 and 110 candela.
12-volt strobe models: 15 and 15/75 candela.
Horn models operate on 12 and 24 volts.
Low current draw: reductions as high as 45%.
Two field-selectable/reversible horn tones:
3000 Hz interrupted electromechanical
Field-selectable/reversible high-low dBA output on horn
(low output on 24-volt models only):
101 peak dBA @ 10 ft. high output.*
96 peak dBA @ 10 ft. low output.*
Field-selectable/reversible temp 3 pattern or non-temp 3 continuous
Horn/strobe can be wired either in tandem or independently.
Weatherproof strobes, horns, and horn/strobes available.
Horns for use with coded power supply available.
Universal mounting plate included with each unit.
One-screw mounting of strobe and horn/strobe to mounting
SpectrAlert strobe and horn/strobe take up no room in the
Single-gang mounting without the use of a mounting plate
Aesthetically pleasing design.
Synchronize horn and strobe with Sync Circuit module
Silence horn on horn/strobe over a single pair of wires using
*Sound output varies with tone and output options selected; sound
levels based upon anechoic room measurements.
12 to 18 AWG (3.25 mm to 0.51 mm ).
Weight, strobe and horn/strobe:
12 V: 10.5 - 17 V. 24 V: 20 - 30
** These products should be operated within their rated voltage
range. UL does, however, test functional integrity to -20% and
+10% of manufacturer's stated ranges.
Horn/Strobe - 15 cd Horn/Strobe - 75 cd
