Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> East
> Used
> Chemiscal transfer, magnetic drive pump, 1/2 hp
Chemiscal transfer, magnetic drive pump, 1/2 hp
Magnetic Drive Pump, Power Rating 1/2 HP, Voltage @ 60 Hz 115/230, Current Rating 11.6/5.8 Amps, Outlet 3/4 Inch MPT, Inlet 1 Inch FPT, Maximum PSI 22, Maximum Head 51 Feet, Motor Enclosure TEFC, Maximum Temperature 200 F @0 PSI, 150 F @ 40 PSI, Water Flow @ 6 Foot of Head 38.0 GPM, @ 9 Feet of Head 36.2 GPM, @ 15 Feet of Head 34 GPM, @ 18 Feet of Head 33.1 GPM, Height 7 Inches, Length 15 1/4 Inches, Width 8 3/4 Inches
* Eliminate seal-caused friction loss, wear, contamination, and leakage.
* Drive magnet is separated from impeller magnet, preventing fluids from contacting the motor drive shaft; eliminates need for mechanical shaft seal.
* Gravity-feed design requires the pump inlet to be lower than liquid level. All are nonsubmersible except No. 4RL36, which is submersible-only. Mount horizontally. Volute rotates in 90 Degree intervals, except Nos. 2P044, 4RL34, and 4RL35, which rotate at 60 Degree intervals.
* Max. specific gravity: 1.1
* MD-HC Series For Highly Corrosive Chemicals
* Pumps handle liquids such as photographic and plating solutions, acids, alkalies, brines, and distilled water.
* Ryton(R) pump housing and impeller, Viton O-ring gasket, and encapsulated ceramic magnet. Ceramic shaft and thrust bearings. 316 stainless steel hardware. Carbon bushings. Motors have 6-ft., 3-conductor SJO cords with 3-prong plugs, except Nos. 4RL34, 4RL35, and 2P044 which must be field-wired.
* Full Load Amps: 11.60/5.80
* GPM of Water @ 6 Ft. of Head: 38.0
* GPM of Water @ 9 Ft. of Head: 36.2
* GPM of Water @ 15 Ft. of Head: 34.0
* GPM of Water @ 18 Ft. of Head: 33.1
* GPM of Water @ 24 Ft. of Head: 30.5
* GPM of Water @ 40 Ft. of Head: 21.6
* GPM of Water @ 50 Ft. of Head: 2.0
* Operating Pressure (PSI): 22.0
* Cord Type: 3-conductor SJO
* Design: Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level
* For Use With: Nonflammable Liquids Compatible with Pump Component Materials
* Application: For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage
