Machine Recycling Discussion and Moderated Newsgroup > Separate Parts
> Knobs and Handles
> East
> New millermatic 252 mig welder 907321
New millermatic 252 mig welder 907321
Patent-pending Active Arc Stabilizer provides excellent starts proven superior to the competition!
Adjustable run-in control is individually settable for both MIG and spool guns. Controlled on the front panel, this easily accessible feature allows the user to optimize starts to the application.
Self-calibrating digital meters allow presetting of voltage and wire feed speed. With spool gun, wire speed meter displays setting - a feature not available in competitve units.
Easy-to-use Digital Operator Interface and attached parameter chart makes it simple toset weld parameters.
Convenient built-in gun and cable holder and consumable compartment.
* 1 Second Tip Saver - Arc shuts off if tip is shorted to work surface for more than 1 second.
* 2 Minute Wire Saver - Wire drive is shut off if arc is not detected 2 minutes after trigger is pressed.
Industrial, dual-gear-driven, aluminum drive system features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.
Fan-On-Demand cooling system only operates when needed reducing power consumption.
M-25 MIG gun features durable on-piece handle, unicable outer jacket, trigger rated for one million cycles, and steel spring coils protecting cable ends.
Built-in direct plug Push-Pull Module for aluminum wire feed capability. XR -Edge or XR-A pistol guns can be directly connected to the Millermatic 252.
Active Arc Stabilizer - Gives you consistent arc starts, softer welding arcs, an easier to control arc on low end setting, and reduces spatter.
Gun-On-Demand - Allows you to use either a standard gun or a Spoolmatic gun without flipping a switch. The machine senses which gun you are using when you pull the trigger.
Fan-On-Demand - Internal power source cooling system that only works when needed, keeping internal components cleaner.
* 15 ft (3.7 m), 250 amp M-25 MIG Gun.
* Factory-installed gas solenoid.
* Argon mix regulator / flow gauge with hose.
* Industrial power cord and plug (plug on 200/230 V model only).
* Factory-installed EZ Change Low Cylinder Rack
* .030/.035 in reversible dual groove drive rolls.
* NEW Set-up and operation CD.
