Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Steam Powered
> East
> 4'X8' torchmate 3 cnc plasma cutter table machine
4'X8' torchmate 3 cnc plasma cutter table machine
* Torchmate 3 Frame and Gantry
* All Electronics and Cabling
* Torchmate CAD and Torchmate Driver Software
* Choice of Hand or Machine Torch Holder
* Torchmate Machine Interface for Plasma
Comparable in construction and performance to competing machines costing $50,000 and up, a bolt-together Torchmate 3 can be assembled in 3 to 4 hours with a few basic hand tools. It can be disassembled in sub-sections and re-assembled in minutes if it must be moved.
Torchmate 3 gantry kits are also available and require approximately 16 hours to complete, including fabricating the table. Please call (***)571-1066 for details.
Our bolt-together Torchmate III machines have the following features not found on our Torchmate 1 CNC DIY kit or Torchmate 2 gantry kits:
Massive extruded aluminum construction throughout.
Finished machines come complete as pictured, requiring only 3 to 4 hours of
Torchmate 3 finished machines and kits come with dual 264 oz. in. motors on
the X (long) axis, and one 264 oz. in. motor on the Y axis.
X axis motors and gear racks are outside the frame rails on both sides of the
machine, and are protected by a 1" steel rail overhang.
Dropped rail on far side permits easy forklift loading of material. Rail system
is sufficiently long to permit the gantry to be moved to the end of the table for
The Torchmate 3 uses the same precision linear motion Y axis components found on our Torchmate 2.
Visit torchmate.com/industrial for complete details
