Machine Recycling Discussion and Moderated Newsgroup > Parts Machines
> Diesel Powered
> North
> Tpi hazardous location fan forced unit heaters 3KW
Tpi hazardous location fan forced unit heaters 3KW
UP FOR SALE MUST GO SALE!!!!!!!!!!!!
Model HLA 12-240360-3.0-24: 240 Volt / 3 Phase / 8.6 Amp Motor
3 kW Hazardous Location Fan Forced Unit Heater - (3kW Model) HLA 12 - X TPI
Designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to the presence of certain flammable gases, vapors, powdered metals or dust.
* Permanently sealed, liquid to air, finned tube heat exchanger core
* Ethylene Glycol to water mixture used as a heat transfer fluid in the heater core, providing -49 F (-45 C) freeze damage protection
* Manual Reset capillary type limit provides high temperature regulation and is rated for 6,000 cycles of service
* 24v transformer and contactor
* Pressure relief valve with cintered metal mesh flame arrestor
* 14 gauge steel cabinet with epoxy powder coated finish contains heater core, motor, and fan assembly
* Narrow gap safety fan guard shields all moving parts
* Adjustable louvers allow directional control of air
* Box lugs furnished for field connections within approved enclosure
* Units cannot be operated in room ambients exceeding 104 F (40 C)
Specifications for All Models:
* Recommended Mounting Height: 8 ft.
* 1 Phase Dimensions: 17.75" H x 20.625" W x 22.375" D
* 3 Phase Dimensions: 17.75" H x 19.75" W x 22.375" D
Specifications for Individual Models:
* Model HLA 12-208160-3.0-24: 208 Volt / 1 Phase / 16.3 Amp Motor
* Model HLA 12-208360-3.0-24: 208 Volt / 3 Phase / 9.8 Amp Motor
* Model HLA 12-240160-3.0-24: 240 Volt / 1 Phase / 14.8 Amp Motor
* Model HLA 12-240360-3.0-24: 240 Volt / 3 Phase / 8.6 Amp Motor
* Model HLA 12-480360-3.0-24: 480 Volt / 3 Phase / 4.3 Amp Motor
Optional Factory Installed Accessories:
* In Built Single Pole Thermostat 50 -90 F
Hazardous Zone Classes and Definitions:
* For use with TPI Hazardous Location Fan Forced Unit Heaters
* Includes arm mounting assembly, base assembly, and wall assembly
* Particularly useful in buildings with insufficient strength to use other types of mounts
* Requires 3 1/2" steel pipe 4" O.D. (not supplied)
* For use with all TPI Hazardous Location Fan Forced Unit Heaters
* Simple and economical if adequate overhead structure exists
* Includes mounting assembly pieces
* Requires 1/2" steel pipe, cut and threaded (not supplied)
* Ideal for buildings that have substantial walls
* Arm can also be bolted directly to structural steel
