Machine Recycling Discussion and Moderated Newsgroup > Components
> Complete Control Circuits
> West
> X-rite 418 handheld reflective densitometer
X-rite 418 handheld reflective densitometer
X-Rite 418 Handheld Reflective Densitometer
This is a portable reflection densitometer, model 418GS-35, made by X-Rite, Inc. of Grandville, MI in excellent used condition. It works very well, and I was able to calibrate it and use it to take various measurements. Cosmetically, it is somewhat gray from being handled with inky hands, and there is some cloudiness in the plastic window over the LCD display. It comes with the manual, charger, calibration card, case, and certificate of calibration (2001). It comes with fresh batteries in it.
* Computerized Color Response (CCR)-The versatile 418 accommodates multiple status responses. Model 418G can take measurements using ANSI-Status T response, which is compatible with the GCA T-reference (T-Ref) standard. You can also select the traditional X-Rite graphic arts response, Status G.
* QuickCal One-Step Calibration-The 418 s Quick-Cal feature makes calibration fast and easy. You simply select the Q-Cal mode on the instrument, then measure the white patch on the supplied calibration target card. You can also get complete agreement with other densitometers using the three-color response calibration.
* Automatic On/Shut-Off-To increase battery life, the 418 automatically turns itself off if it has not been used within 45 seconds; and it automatically turns back whenever a key is pressed or measurement taken. Tests have shown that over 4,500 readings can be taken on one charge of new batteries.
* Nonvolatile Memory-A lithium battery stores calibration data and measured values when the densitometer s primary rechargeable batteries are depleted or removed.
* Automatic Color Selection-Equipped with Auto Color Select, the 418 eliminates manual rotation of a filter wheel and related erroneous measurements. All colors are measured simultaneously, then the correct reading is displayed in less than one second.
* Large LCD display clearly identifies measurement data and mode function. No need for numeric codes to identify this information.
* Three large buttons place all function controls at operator s fingertips.
* Small 1.7mm aperture (GS or ES model) for reading reduced-size color bar patches.
* AC adapter is provided to allow readings while batteries are being recharged.
* Replaceable optics allow you to switch between G and E response.
* Two-way RS-232 interface operates at 1200 baud, or one of several other baud rates.
