Machine Recycling Discussion and Moderated Newsgroup > Components
> Complete Control Circuits
> Curtis motor controller 0147-37214 36V golf cart sepex
Curtis motor controller 0147-37214 36V golf cart sepex
CURTIS MOTOR CONTROLLER 0147-37214 36 VOLT 400A
Full bridge control of the motor field allows reversing without the use of direction contactors.
Fully compatible with the Model 1307 Programmer for programming, diagnosticand test information.
Armature current controlled at all times, reducing arcing and brush wear.
Regenerative braking increases usable battery energy and reduces motor heating.
Neutral braking provides automatic braking in neutral - simulates the feel of compression braking. Braking level adjustable.
MultiMode allows four user selectable vehicle operating profiles.
Programmable to match individual separately excited motor characteristics.
Meets or exceeds EEC fault detect requirements with circuitry and software to detect faults in the throttle circuit, MOSFET drive circuits, and driver outputs.
Vehicle speed is controlled and limited at top end via motor field control.
Passive regen provides vehicle speed control at any throttle position when going down ramps.
Linear temperature cutback on armature and field drive current limits. No sudden loss of power under any thermal conditions.
Undervoltage cutback reduces motor current to maintain the battery voltage above the under-voltage point.
PWM drivers for contactors are programmable for pullin and holding currents to reduce power dissipation and allow the use of common contactors.
HPD and SRO interlock options ensure proper startup sequence.
Emergency reverse (belly button) input causes immediate reversal upon activation.
Integral fault detect LED flashes error code information.
Two fault outputs provide diagnostic information to dash mounted displays.
Fully protected inputs and outputs.
Hour meter enable output active only when vehicle is moving.
Active power on self test and continuous diagnostics during operation.
Internal and external circuits ensure proper software operation.
CALL (***)-595-9662 WITH ANY QUESTIONS
2957 RANDOLPH AVE SUITE B, COSTA MESA, CA 92626
