Machine Recycling Discussion and Moderated Newsgroup   >   Full Machines   >   Electrics electronics electrician guide training course

Electrics electronics electrician guide training course


Electrics and Electronics Training Course CD-ROM brought to you by OS Project Software for Windows and Mac OS X
Professional Training Course CD-ROM for Windows
This is a practical guide to electrics and electronics. Either run from the CD-ROM or install this professional software package directly onto your computer. This course is fully indexed and provided in PDF format with menu and help features. The course in split into 24 manuals that contain over 4000 pages of information.
Electrics and Electronics Training Manual 1 - Introduction to Matter, Energy, and Direct Current (243 Pages)
Chapter 1 - Matter, Energy, and Electricity
Electrics and Electronics Training Manual 2 - Introduction to Alternating Current and Transformers (199 Pages)
Chapter 1 - Concepts of Alternating Current
Chapter 4 - Inductive and Capacitive Reactance
Electrics and Electronics Training Manual 3 - Introduction to Circuit Protection, Control, and Measurement (176 Pages)
Chapter 1 - Circuit Measurement
Chapter 2 - Circuit Protection Devices
Chapter 3 - Circuit Control Devices
Electrics and Electronics Training Manual 4 - Introduction to Electrical Conductors, Wiring Techniques, and Schematic Reading (119 Pages)
Chapter 1 - Electrical Conductors
Electrics and Electronics Training Manual 5 - Introduction to Generators and Motors (100 Pages)
Chapter 1 - Direct Current Generators
Chapter 2 - Direct Current Motors
Chapter 3 - Alternating Current Generators
Chapter 4 - Alternating Current Motors
Electrics and Electronics Training Manual 6 - Introduction to Electronic Emission, Tubes, and Power Supplies (166 Pages)
Chapter 1 - Introduction to Electron Tubes
Chapter 2 - Special-Purpose Tubes
Electrics and Electronics Training Manual 7 - Introduction to Solid-State Devices and Power Supplies (236 Pages)
Chapter 1 - Semiconductor Diodes
Chapter 4 - Solid-State Power Supplies
Electrics and Electronics Training Manual 8 - Introduction to Amplifiers (154 Pages)
Chapter 2 - Video and Rf Amplifiers
Chapter 3 - Special Amplifiers
Electrics and Electronics Training Manual 9 - Introduction to Wave-Generation and Wave-Shaping Circuits (218 Pages)
Chapter 3 - Waveforms and Wave Generators
Electrics and Electronics Training Manual 10 - Introduction to Wave Propagation, Transmission Lines, and Antennas (229 Pages)
Chapter 2 - Radio Wave Propagation
Chapter 3 - Principles of Transmission Lines
Electrics and Electronics Training Manual 11 - Microwave Principles (165 Pages)
Chapter 1 - Waveguide Theory and Application
Chapter 2 - Microwave Components and Circuits
Chapter 3 - Microwave Antennas
Electrics and Electronics Training Manual 12 - Modulation Principles (186 Pages)
Chapter 1 - Amplitude Modulation
Chapter 2 - Angle and Pulse Modulation
Electrics and Electronics Training Manual 13 - Introduction to Number Systems and Logic Circuits (163 Pages)
Chapter 2 - Fundamental Logic Circuits
Chapter 3 - Special Logic Circuits
Electrics and Electronics Training Manual 14 - Introduction to Microelectronics (140 Pages)
Chapter 2 - Miniature/Microminiature (2M) Repair Program and High-Reliability Soldering
Chapter 3 - Miniature and Microminiature Repair Procedures
Electrics and Electronics Training Manual 15 - Principles of Synchros, Servos, and Gyros (167 Pages)
Electrics and Electronics Training Manual 16 - Introduction to Test Equipment (222 Pages)
Chapter 1 - Test Equipment Administration and Use
Chapter 2 - Miscellaneous Measurements
Chapter 4 - Common Test Equipment
Chapter 5 - Special-Application Test Equipment
Chapter 6 - The Oscilloscope and Spectrum Analyzer
Electrics and Electronics Training Manual 17 - Radio-Frequency Communications Principles (160 Pages)
Chapter 1 - Introduction to Radio-Frequency Communications
Chapter 2 - Introduction to Communications Theory
Chapter 3 - Fundamental Systems Equipment
Chapter 4 - Introduction to Satellite Communications
Chapter 5 - Introduction to Miscellaneous Communications Systems and Equipment
Electrics and Electronics Training Manual 18 - Radar Principles (164 Pages)
Chapter 1 - Radar Fundamentals
Chapter 3 - Radar Indicators and Antennas
Chapter 4 - Radar System Maintenance
Electrics and Electronics Training Manual 19 - The Technician's Handbook (146 Pages)
Electrics and Electronics Training Manual 20 - Master Glossary (88 Pages)
Electrics and Electronics Training Manual 21 - Test Methods and Practices (175 Pages)
Chapter 1 - Basic Measurements
Chapter 3 - Quantitative Measurements
Chapter 4 - Qualitative Measurements
Chapter 5 - Waveform Interpretation
Chapter 6 - Introduction to Digital Computers
Chapter 7 - Magnetic Recording
Chapter 8 - Introduction to Fiber Optics
Electrics and Electronics Training Manual 22 - Introduction to Digital Computers (130 Pages)
Chapter 1 - Operational Concepts
Chapter 4 - Data Representation and Communications
Electrics and Electronics Training Manual 23 - Magnetic Recording (127 Pages)
Chapter 1 - Introduction to Magnetic Recording
Chapter 3 - Magnetic Tape Recorder Heads
Chapter 4 - Magnetic Tape Recorder Transports
Chapter 5 - Magnetic Tape Recorder Record and Reproduce Electronics
Chapter 6 - Magnetic Tape Recorder Specifications
Chapter 7 - Digital Magnetic Tape Recording
Chapter 8 - Magnetic Disk Recording
Electrics and Electronics Training Manual 24 - Introduction to Fiber Optics (195 Pages)
Chapter 1 - Background on Fiber Optics
Chapter 2 - Fiber Optic Concepts
Chapter 3 - Optical Fibers and Cables
Chapter 4 - Optical Splices, Connectors, and Couplers
Chapter 5 - Fiber Optic Measurement Techniques
Chapter 6 - Optical Sources and Fiber Optic Transmitters
Chapter 7 - Optical Detectors and Fiber Optic Receivers
The training course CD-ROM is compatible with the following operating systems:
* Windows 95, 98, NT, ME, 2000, XP, Vista and Windows 7
Adobe Reader is required for viewing the course in Windows. A full installation of Adobe Reader is included on the CD-ROM.
The box image used is for illustration purposes only. You will receive your printed CD-ROM in a protective sleeve and mailer. Please contact us if you need any help or have any questions.
Please note that once an item is sent we no longer have control over the delivery. We always dispatch items quickly but occasionally they do go missing and it is no fault of our own. Please consider this when contacting us. We always send replacements and will we make sure your items get to you. Please contact us and we will do our best to help you.
This training course is copyrighted and contains our protected IP. Any copying, duplicating, reproducing, licensing or sub licensing is prohibited.
Copyright 2010 OS Project Software. All rights reserved.



Electrics electronics electrician guide training course